HD650 SERIES

Anchor:  Ground Mount
Colors:     W,, O, Y
Height:     19", 24", 30", 36" & 48" Above Ground

FlexStake's 650 Series is an all-weather, tubular ground mounted delineator that can take 30 -100 more hits than our competitors posts. Our tubular ground mount delineators are highly visible at 360 degrees. The 650 Series clearly delineates the edge of a roadway or path with specified reflective sheeting mounted on the post at drivers eye level.

The post is color impregnated, UV stabilized, copolymer extrusion-impact resistant. Post is extruded from a semi-flexible hi-impact polymer. The hinge is hi-density, all-weather polymer, mechanically fastened to a patented barbed anchor that really stays in the ground. The anchor is hi-density polymer that is unaffected by adverse soil conditions.

Hi Intensity Sheeting sold separately.

SM 700 SERIES

MTBF:     340 hits at 35 mph
               75 hits at 55 mph

Height :   19”, 24”, 30”, 36”,
                48”, 60”, 72”
Anchor:   Surface Mount
Colors:     W, R, O, Y, G, Bu, Br, Gy
Sheeting: Reflective (federally approved)

The FlexStake Surface Mount SM is the only sensible choice for hi-traffic, hi-impact locations. Using the same color impregnated polycarbonate extrusion and flexible hinge as the virtually indestructible FlexStake HD surface mounted SM's are still standing after 8 years of hard road use.

FlexsStake's SM's outlast every other surface mounted delineator on the market by an incredible margin. SM's are easy to assemble and quick to install. They can be mounted to concrete, asphalt, wood and other hard surfaces using lag bolts, butyl rubber, epoxy and even nails.

FlexStake SM is a four part assembly:
1. post and hinge
2. the base
3. the grips
4. the pin

Hi Intensity Sheeting and Butyl Adhesive Pads sold separately.

TM 750 SERIES

MTBF:       Over 75 hits at 55 mph
Height:      19”, 24”, 30”, 36”, 48”
Anchor:     Surface or Ground Mount
Weights:   From 2.25 to 2.5 lbs.
Colors:       W, O, Y
Sheeting:   Reflective

Though suitable as a multi-purpose traffic delineator, FlexSTake TM was especially designed as a hi-impact channelizer for sites where traffic from side streets would be merging with traffic in a thoroughfare. The TM is an impact-resistant surface mounted post that has all the advantages of the internationally acclaimed FlexStake SM, plus an enhanced 360 degree visibility.

The TM channelizer maybe mounted on concrete, asphalt or to the FlexStake Flatfoot. For channelization in sand, dirt or loose rock, the FlexStake TMG (Tubular Ground Mount) is the post of choice.

The TM Marker is a five-part assembly:
1. the post
2. the inner-core and hinge
3. the base
4. the grips
5. the pin

Hi Intensity Sheeting and Adhesive Pads sold separately.

TM 750 SERIES FLAT-TOP

MTBF:       Over 75 hits at 55 mph
Height:      19”, 24”, 30”, 36”, 48”
Anchor:     Surface or Ground Mount
Weights:   From 2.25 to 2.5 lbs.
Colors:       W, Y
Sheeting:   Reflective

The TM 750 Series Flat-Top is a high impact-resistant surface mounted channelizer  and is suitable as a multi-purpose traffic delineator.

The TM channelizer maybe mounted on concrete, asphalt or to the FlexStake Flatfoot. For channelization in sand, dirt or loose rock, the FlexStake TMG (Tubular Ground Mount) is the post of choice.

The TM Marker is a five-part assembly:
1. the post
2. the inner-core and hinge
3. the base
4. the grips
5. the pin

Hi Intensity Sheeting and Adhesive Pads sold separately.

EZ DRIVE SERIES

MTBF:     40 hits at 45 mph

Height Above Grade:
                 19”, 24”, 30”, 36”, 48”
Anchor:     Surface Mount
Colors:      W, R, O, Y, G, Bu, Br, Gry
Sheeting:  Reflective

Mean time before failure. Results of certified tests made under controlled conditions. Results may vary depending upon type of installation and geographic location.

Suitable for installation in any environment, E-Base is a truly bid-competitive high-impact delineator. Though not as bullet-proof as our duplex post, the E-Base post is still a very high quality product; a unique, UV-stabilized, copolymer extrusion. To reduce mounting costs, the base itself is just one part. It is cast from a modified, high-density, UV stabilized co-polymer, capable of lasting many years.

The post is an all-weather, color impregnated, UV stabilized specially formulated polymer extrusion. Drive clamp is mild steel. With the exception of the metal drive clamp, EZ post is 100% post-consumer recycled plastic.

(Post Drivers sold separately)

E-BASE

MTBF: 40 hits at 45 mph

Height Above Grade:  36”, 48”
Anchor:        Surface Mount
Colors:         W, R, O, Y, G, Bu, Br, Gry
Sheeting:     Reflective

Mean time before failure. Results of certified tests made under controlled conditions. Results may vary depending upon type of installation and geographic location.

Suitable for installation in any environment, E-Base is a truly bid-competitive high-impact delineator. Though not as bullet-proof as our duplex post, the E-Base post is still a very high quality product; a unique, UV-stabilized, copolymer extrusion. To reduce mounting costs, the base itself is just one part. It is cast from a modified, high-density, UV stabilized co-polymer, capable of lasting many years.

Hi Intensity Sheeting and Adhesive Pads sold separately