GS100 SERIES

GS can take repeated impacts at 35 mph, 55 mph, and even 80 mph. Our posts typically withstand 75 or more automotive impacts at 55 mph.

Height:            18”, 24”, 30” & 36”                         paddle height
Rail Lengths:   10 and 12ft. sections
Weight:           3.5 to 3.8 lbs. Per foot
Paddle Colors:     Green and Gray
Paddle Mounting: Pop & go, no bolts                              required
Rail:     Pop & 4 to 6 lag bolts per section

With its pop-and-go design, FlexStake Glare Screen GS is literally a snap to install. When fully assembled, GS weighs only 13 lbs. per 12 foot section, so rails can be popped together off-site and hand carried to the barrier. FlexStake GS needs only four to six mounting studs per section, so labor and exposure to traffic are minimal. GS rails can be mounted on any rigid surface. GS's narrow-paddle, all-copolymer design is the most price competitive glare screen on the market.

ISLAND K MARKER

CONSTRUCTION
12" x 6" flexible sign substrate consisting of three yellow reflectors, each with a dimension of approximately 3" arranged horizontally mounted to polycarbonate post with a polymer hinge attaching post to anchor. Anchor may barbed for soil conditions or surface mounted for concrete/asphalt.

 COMPOSITION
Composed of polyethylene, polyurethane and polycarbonate. Entire assembly is made of over 40% by weight recycled post-consumer material.

ORIGIN
Manufactured 100% in the U.S.A.

RECOMMENDED USE
Delineate raised islands or gore areas.
 

GR100 SERIES
Flexible guardrail delineators provide impact resistance from wide loads, overhanging maintenance equipment, mowers, etc..

DETAILED REQUIREMENTS

A. The post is made of a polycarbonate material which shall be resistant to impact, ultraviolet light, ozone, hydrocarbons, and shall be self-erecting after impacts. Polycarbonate post shall remain dimensionally stable from -150 deg. F (brittleness point) to +285 deg F (melting point).

B. Post shall remain intact up to fifty impacts at temperatures from -30 deg. F to 130 deg. F

C. The minimum width of the post shall be 3" and the maximum wall thickness shall be 0.180". Lengths will be specified on order. Posts are provided with predrilled holes to facilitate ease in mounting.

D. The posts shall be opaque white, yellow, red, green, orange, blue, brown, and grey in color. They shall be colorfast and shall be designed to provide an essential convex surface to accommodate a 3" wide reflective sheeting on both sides. Sheeting shall meet DOT specifications and will be specified on order.

E. Posts shall be free of surface porosity and other defects that may affect appearance and serviceability.

F. Posts shall be recycleable.

G. Posts shall be field-repairable with a repair kit. Posts and other components shall be field replaceable.