|
We salute our troops both
at home and abroad! Thank YOU
for all you do!
WBE Certified
| |
|
Model 2001-46™ Barrier Specifications
|
|
Click here
to download the specification for the Model
2001™ in a Portable Document Format [pdf]
|
| Intent: Yodock Traffic Control Device, Model
2001-46 is a recyclable, portable energy disbursement cell. It is the
intent of this specification to describe a lightweight portable
plastic traffic control device. The intended use of the Model 2001
is to assist in the prevention of vehicular penetration of a work
zone or gore area, street and road closures, as well as providing
clear delineation for traffic channelization and pedestrian
safety. |
| Scope: This Specification recognizes the need
for a lightweight, portable traffic control device to perform some
of the functions of concrete barriers, cones, barrels, Type I, II,
III barricades and other such devices used to control, direct,
channel, and stop vehicular and pedestrian traffic for purposes of
aiding in containment and / or safety. |
Construction: The 2001-46 is made using rotational molding
to ensure water tightness and integrity. The unit is manufactured
with internally molded baffels in order to maintain its shape,
be properly sealed and leak proof. The unit is provided with drain plugs
and underside grooves to allow flow of surface
drainage. The dimensions of the unit are as follows:
| Height: 46" |
Base Width: 24" |
Functional Length: 72" |
| Male Connection: 5.25" |
Female Indentation: 6" |
Top Fill Holes: 4" |
| Post Boot: 3.75" and 2.75" |
Side View of
2001-M Barrier |
The units are joined together by a unique coupling device.
This coupling device aids in the prevention of separation of the
individual portable energy distribution cell units, in the event
of an impact. The unit has ports devised to allow for ground
mounting and forklift holes for ease of mobility when filled.
|
| Material: The material is a recyclable
polyethylene. It is rotational molded to a thickness of
approximately 8mm |
| Ultraviolet Light: An ultraviolet light
inhibitor is introduced into the raw material mix to provide
sufficient protection to ensure reasonable life of the product in
all weather conditions |
| Colors: The standard colors of the model 2001-46
are opaque ivory and orange. Other colors can be produced. |
|
Installation: Each unit shall weigh approximately 130
pounds empty and up to approximately 1600 pounds when water
filled. When installing as a longitudinal channelizer, the units
can be interlocked and ballasted. When installed as a work zone
safety device or road closure, the units may be used empty,
ballasted, or completely filled with water. Warning flags, steady
burning lights or flashing lights can be securely mounted to each
unit, if conditions require.
|
|
|
