|
We salute our troops both
at home and abroad! Thank YOU
for all you do!
WBE Certified
| |
Model 2001M-32™ Barrier Specifications
Click here to
download the specification for the Model
2001M-32™ in a Portable Document Format [pdf] |
| Intent: Yodock Model 2001M-32 is a
recyclable, portable energy disbursement cell. This is our smaller barrier
that can be used anywhere. It is the intent of this specification to
describe a lightweight portable plastic traffic control device. The
intended use of the model 2001 is to assist in the prevention of vehicular
penetration of a work zone or gore area, street and road closures, as well
as providing clear delineation for traffic channelization and pedestrian
safety. |
| Scope: This Specification recognizes the
need for a lightweight, portable traffic control device to perform some of
the functions of concrete barriers, cones, barrels, Type I, II, III
barricades and other such devices used to control, direct, channel, and
stop vehicular and pedestrian traffic for purposes of aiding in
containment and / or safety. |
Construction: The 2001M-32 is made using rotational molding to
ensure water tightness and integrity. The unit is manufactured with
internally molded baffels in order to maintain its shape, be properly
sealed and leak proof. The unit is provided with drain plugs and
underside grooves to allow flow of surface drainage. The dimensions of
the unit are as follows:
| Height: 32" |
Base Width: 18" |
Functional Length: 72" |
| Male Connection: 5.25" |
Female Indentation: 6" |
Top Fill Holes: 4" |
| Post Boot: 3.75" and 2.75" |
|
The units are joined together by a unique coupling device. This
coupling device aids in the prevention of separation of the individual
portable energy distribution cell units, in the event of an impact. The
unit has ports devised to allow for ground mounting and forklift holes
for ease of mobility when filled.
|
| Material: The material is a recyclable
polyethylene. It is rotational molded to a thickness of approximately 8mm |
| Ultraviolet Light: An ultraviolet light
inhibitor is introduced into the raw material mix to provide sufficient
protection to ensure reasonable life of the product in all weather
conditions |
| Colors: The standard colors of the model
2001M-32 are opaque ivory and orange. Other colors may be produced. |
|
Installation: Each unit shall weigh approximately 75 pounds
empty and up to approximately 750 pounds when water filled. When
installing as a longitudinal channelizer, the units can be interlocked and
ballasted. When installed as a work zone safety device or road closure,
the units may be used empty, ballasted, or completely filled with water.
Warning flags, steady burning lights or flashing lights can be securely
mounted to each unit, if conditions require.
|
Call 1-800-640-1843 for Pricing Info.
|
